In the daily production process of heavy corrugated box, there is a very important production process, which is the paper production line. Pressure line has its own classification, including flat pressure line, high and low pressure line, concave and convex pressure line. Flattening refers to the position of the embossing line on the non printing surface; high-voltage line and low-voltage line mean that the size of the shock cover of our cartons is different; while concave convex embossing line refers to the embossing line wheel used by us on the corrugated board machine is the male embossing line wheel and the female embossing line wheel, so the outgoing board is the concave convex embossing line. In order to prevent the pressure line from breaking, the concave convex line is commonly used in corrugated board factory, which is why corrugated board will have wavy lines. How to customize the width of the line? This is mainly to see the thickness of the corrugated board. The thicker the board is, the wider the line is.

　　那么，為什么分離器打破沉重的瓦楞紙板板?其原理是設備的調整不夠合理，導致線輥之間的間隙過小。紙板在紙張質量上，定量低。硬紙板的濕度太低。還有硬紙板的火柴紙不太合理。究其原因可以從源頭上找到，在無法改變紙張和紙張的情況下，調整設備和紙板的含水率，利用預壓線配合指線壓機做好各方面的調整。

　　So, why does the separator break the heavy corrugated board? Its principle is that the adjustment of the equipment is not reasonable, resulting in the gap between the line rollers is too small. Paperboard in paper quality, low quantitative. The humidity of the cardboard is too low. And matchpaper on cardboard is not reasonable. The reason can be found from the source, in the case of unable to change the paper and paper, first adjust the moisture content of the equipment and paperboard, and use the pre pressing line with the finger wire press to do all aspects of adjustment.

　　壓紙機由切刀、壓紙輥、中心軸、轉軸、機架等主要部件組成。根據切輥和線輥的數量分成兩組成線壓機和三組成線壓機。它是根據承重瓦楞紙箱的構造，沿瓦楞紙板和瓦楞紙板方向的垂直壓力線，并切成所需的規格尺寸。

　　The press consists of cutter, press roll, central shaft, rotating shaft, frame and other main parts. According to the number of cutting roller and line roller, it is divided into two parts of line press and three parts of line press. It is a vertical pressure line along the direction of corrugated board and corrugated board according to the structure of load-bearing corrugated box, and cut into the required size.

　　以上是瓦楞紙箱廠家小編為大家介紹的相關內容，想要了解更多內容，歡迎訪問網站：http://www.zywygg.com

　　The above is a brief introduction of corrugated box manufacturers. For more information, please visit http://www.zywygg.com